Pricing and Specifications
To order, contact a Wilcraft dealer on the Dealer Page.
|
All prices FOB Maplewood, MN facility
|
Base Sportsman Wilcraft includes:
- Lightweight self-propelled amphibious vehicle
- Weighing in at 500 pounds, this rig has an extremely light footprint
- A payload of 600 pounds - gets you, your equipment and even a buddy on areas once left to the daredevils
- Engineered and built for performance on/in the wide range of environments a sportsman encounters
- Large open floor plan to allow for your custom set-up or needs
- Substantial 108"x 51" wheel base gives it a large footprint, putting less force per square inch on the surface then a person walking.
- Powder coated welded .080" thick aluminum hull (pic 1)
- Providing strength and great appearance for many years
- Reinforced with 2"x4" full length floor ribs for strength
- Closed cell flotation foam for buoyancy and warmth with .063" aluminum floor panel
- Full width padded rear bench seat
- Thick closed-cell vinyl/nitrile cushion — as in modern flotation suits
- Waterproof, shock absorbing and warm
- Three fishing holes with watertight plugs (pics 2, 3, 4)
- Uniquely designed raised curb to lessen the chance for items falling down the holes
- Fish from inside the vehicle; comfort, convenient, safer and warmer
- Watertight plugs are multi-use providing added storage, ideal for bait, beverages, port-a-potty or whatever you come up with
- Independent powered front and rear lift system
- With the push of a couple of buttons the hull raises to 11" for great ground clearance or lowers to the ice/ground bringing you down to the ice sealing out the cold
- Gives you the unique ability to slide over snowdrifts or plow ridges plus is the key feature that allows the Wilcraft to self-extract
- 302cc Briggs and Stratton™ engine with electric start & recoil backup
- Easy cold starts and reliable performance
- Overhead valves and cast iron cylinder sleeve for long life
- Service backed with Briggs and Stratton's service dealer network
- 10 amp regulated charging alternator
- 300 cold cranking amp battery for starting and powering your accessories
- 55-watt halogen headlights and LED taillight
- Bright and powerful adding visibility and safety both night and day
- CVT two speed locking differential transaxle with reverse
- Sealed with synthetic EP transaxle fluid for low temperature operation
- Great low-end torque when the going is rough and up to 20mph for getting to your spot
- Locking differential puts both rear wheels to work at once when added traction is needed
- Large 10" disc brake for effective stopping (pic 5)
- Removable commercial grade indoor/outdoor rubber-backed floor carpet
- Large low pressure tires
- Providing great traction on a wide range of terrains and soft footprint
- AT25X12-9 Carlisle Trail Wolf rear tires
- AT22X8-10 Carlisle 4-MAX front tires
- Aluminum rims
- Not only look good, they are lightweight and rustproof
- Tiller style steering and control
- Easy one-hand control
- Smartly placed for full use of cabin area
- Twist throttle for sure control of your speed
- Hand actuated hydraulic disc brake
- Accessible grease fittings and serviceable wheel bearings (pic 6)
- 15 grease zerk fittings for complete lubrication of lift pivots and providing extended vehicle life
- Sealed tapered roller wheel bearings for smooth operation & long life
- Three year limited warranty plus a commitment to you for long term service
- Provided by experienced technical personnel that are dedicated to keeping your Wilcraft on the lake
|
$9,795.00
|
pic 1
pic 2
pic 3
pic 4
pic 5
pic 6
|
|
Enclosure Options
|
Frame Assembly — required for Enclosure Skins
- Fixed length bows for instantaneous set-up
- Easy flip-over design gets you fishing and out of the elements fast
- No spreader bars or adjustable tubes needed for this setup
|
$250.00
|
|
Enclosure Skin
- Single layer wind and water resistant enclosure skin passes the FR CPAI 84 rating
- When up, this enclosure is 48"x 76" with 56" of headroom
- UVR resistant 20 gauge clear vinyl windows with shades
- Front left access zipper and rear zippered vent flap
|
$450.00
|
|
Twin-layer Enclosure Skin — precision tailored premium quality material
- Twin-layer enclosure skin — Black wind and water resistant outside to attract solar heat and
light color inside for a brighter environment and passes the FR CPAI 84 rating
- When up, this enclosure is 48"x 76" with 56" of headroom
- UVR resistant 20 gauge clear vinyl 36"x 27" front and four side 18"x20" side
windows that Velcro™ in for ease of removing, venting and cleaning
- Removable twin-layer window shades for warmth and privacy
- Front left access zipper and rear zippered vent
|
$990.00
|
|
Insulated Enclosure Skin — for a warmer quieter cabin
- Same premium quality material as the twin-layer skin plus Thinsulate™ layer
- When up, this enclosure is 48"x 76" with 56" of headroom
- UVR resistant 20 gauge clear vinyl 36"x 27" front and four 18"x20" side
windows that Velcro™ in for ease of removing, venting and cleaning
- Removable insulated window shades for warmth and privacy
- Front left access zipper and rear zippered vent flap
|
$1,280.00
|
Image
Coming
Soon
|
Carpeted Hull Side Walls and Hood — adding a cozy feel
- Adds warmth, sound dampening and Velcro™ hook compatible for hanging rods, lures, etc.
|
$125.00
|
Image
Coming
Soon
|
Camouflage Enclosure skin
- Precision tailored, top quality, extremely durable material. Single layer wind and
water resistant enclosure skin - God's Country print
- 27"x 36" front, 26"x 26" rear and four 18"x 20" side openings with replaceable
shoot through screens with shades
- Two zippered D shaped skylight openings for wing shooting
Note: Other trademarked camouflage prints available at additional cost, subject to availability and licensing.
|
$780.00
|
|
Camouflage Twin-layer Enclosure Skin
- Same durable material as above
- God's Country print outside with blackout interior to conceal your silhouette
- 27"x 36" front, 26"x 26" rear and four 18"x 20" side shoot through screens with twin-layer shades
- Two zippered D shaped skylight openings for wing shooting
Note: Other trademarked camouflage prints available at additional cost, subject to availability and licensing.
|
$1,290.00
|
Image
Coming
Soon
|
Camouflage Insulated Enclosure Skin
- Same durable canvas as above but added warmth
- Insulated wind and water resistant enclosure skin - God's Country print outside a
layer of insulation and blackout interior to conceal your silhouette — top of
enclosure can be ordered with light gray ceiling for lighting
- 27"x 36" front, 26"x 26" rear and four 18"x 20" side shoot through screens with insulated shades
- Two zippered D shaped skylight openings for wing shooting
Note: Other trademarked camouflage prints available at additional cost, subject to availability and licensing.
|
$1,595.00
special order
not stocked
|
|
Clear Vinyl Windows — for camouflage skins
- Includes 6 UVR resistant 20 gauge clear vinyl windows for year round use
- Velcro™ in for ease of removing, venting and cleaning
|
$140.00
|
Image
Coming
Soon
|
Camouflage — Front Bra to conceal headlights and hood - God's Country print
|
$80.00
|
Image
Coming
Soon
|
Camouflage — Rear Cover to conceal engine and fenders - God's Country print
|
$95.00
|
Image
Coming
Soon
|
Camouflage — Wheel Inserts to cover aluminum wheels - God's Country print
|
$80.00
set of 4
|
Image
Coming
Soon
|
NEW &mdash X2 Enclosure
Why? Because it doubles the interior room with this off-the-side enclosure.
- When open, the X2 provides 102" x 76" floor area and 78" of headroom
- Whether for a few ice anglers or spearing, this enclosure gives you the room
|
|
|
Bow assembly for X2 Enclosures — needed for X2 skins and twice the room
|
$300.00
|
Image
Coming
Soon
|
X2 Enclosure Skin
- Top quality, precision tailored skin
- Black single layer wind and water resistant enclosure skin
- Two 12"x 18" UVR resistant 20 gauge clear vinyl windows removable for ease of
venting and cleaning — includes shades for privacy
- Left side 28"x 60" zippered access
|
$775.00
|
Image
Coming
Soon
|
X2 Twin-layer Enclosure Skin
- Twin layer wind and water resistant enclosure skin — Dark wind and water
resistant outside to attract solar heat and light inside for a brighter environment
- Three 12"x 18" UVR resistant 20 gauge clear vinyl windows that are removable
for ease of venting, cleaning or replacing
- Twin layer window shades for warmth and privacy
- Left side 28"x 60" zippered access
|
$1,595.00
|
Image
Coming
Soon
|
X2 Camouflage Twin-layer Enclosure Skin
- Twin layer wind and water resistant enclosure skin — God's Country print outside
wind and water resistant outside and dark or light inside
- Three 12"x 18" UVR resistant 20 gauge clear vinyl windows that are removable
for ease of venting, cleaning or replacing
- Twin layer window shades for warmth and privacy
- Left side 28"x 60" zippered access
|
$1,895.00
|
Image
Coming
Soon
|
X2 Carpeted Hull Side Walls
- Adds warmth, sound dampening and Velcro™ hook compatible for rods, lures, etc.
|
$95.00
|
Image
Coming
Soon
|
|
More Vehicle Options
|
Engine Upgrade — 342cc / 12 HP includes CVT upgrade
|
$625.00
|
Image
Coming
Soon
|
12-Volt LED Rope Lighting
- Provides soft interior lighting
- Includes LED switch and fuse
- Low amperage draw for many hours of light
|
$175.00
|
|
Battery Minder
- Maintains your battery when plugged into 120volt A/C
- Will not over charge, keeps your rig charged and ready to go
|
$60.00
|
Image
Coming
Soon
|
Auger Mounts
- Mounts on the front lift handle/bumper
- Convenient and out of the way carrier for your auger
|
$60
set of 2
|
|
Front Tire Skis — mount to standard front tires
- Providing added floatation on snow covered areas
|
$275.00
set of 2
|
|
Tire Studs
- Aggressive screw-in tire studs for the added grip on glare ice
- Improves ice traction and handling capabilities
|
$45.00
set of 240
|
|
22.5X10-8 Carlisle Turf Tamer Front Tires — upgrade
- Wider tire and rim than our standard
- Provides you greater floatation on soft terrain and snow
|
$185.00
set of 2
|
|
Wheel Center Caps
- Adds a finishing touch to axle ends
|
$25.00
|
|
J-Wheelz
- Mud and Snow - added flotation and traction.
- Water - added bouyancy and propulsion.
|
$295.00
per pair
|
|
|
Trailer and Accessories
|
Travel/Storage Cover
- Full cover - water resistant to protect your investment
- Draw rope for snug fit plus 3 under hull straps and rear hold-down loops
|
$475.00
|
|
Trailer 65" x 12' Aluminum
- All aluminum construction — creating a virtually maintenance-free trailer
- Extruded 6" side rail provides strength and stability to the entire frame
- Full width bi-fold arched end gate ramp to minimize wind resistance
- 3" wishbone formed aluminum tongue with 2" ball coupler and safety chains
- ST175-80-R13-load range C tires on white mod steel wheels
- 3-year structural and 5-year 2200# torsion axle warranty
|
$2,275.00
|
|
Trailer Salt Shield
Keep road spray and salt off of your Wilcraft.
|
$245.00
|
|
|
EXtend-A-Haul and Accessories
|
EXtend-A-Haul
Extend-A-Haul™ Loading Ramp system is a strong, brushed aluminum, truck bed extender and ramp.
Allows you to easily carry all the "stuff" that won't fit on normal truck beds which may include Wilcraft™,
golf carts, Jon boats, ATVs, and motorcycles, to building materials; including but not limited to carpet
and wood, you can haul it all. The Extend-A-Haul™ also features an exclusive gravity-loading ramp
design that simplifies loading and unloading. Winch your load up and let gravity do the rest.
- Hauling your Wilcraft™ on your pick-up, no trailer needed.
- Load and carry your ATV and Portable, no lifting or disconnecting.
- Even two ATVs at a time.
- Motorcycle load and haul. (optional accessory)
- Golf carts
- Long awkward building materials, no problem.
- There's even a model for your UTV's bed
Built with extruded 6061 aluminum alloy, then TIG welded this ramp will last for years.
EXtend-A-Haul provides a one year warranty against defects in material and workmanship.
The Extend-A-Haul™ ramp loading system is available in a variety of lengths
and attaches easily to most truck beds. You may store it in your truck or easily remove from
your vehicle after each use. Vehicle owners do not need additional insurance or registration,
plus you can't jackknife this.
| Pricing plus freight |
| Truck 5' EXtend-A-Haul™ | $1,395.00 |
| Truck 6' Extend-A-Haul™ | $1,495.00 |
| Truck 8' Extend-A-Haul™ | $1,595.00 |
| UTV Extend-A-Haul™ | $895.00 |
Accessories: |
| Winch Kit | $375.00 |
| Easy-out Kit | $225.00 |
| Motorcycle Kit | $875.00 |
| Snowmobile Kit | $875.00 |
We offer complete installation service or you may install them yourself.
Installation costs from $225.00 plus materials. |
Click here to see all the EXtend-A-Haul pictures showing it's many uses.
|
|
Mulitfarious, Inc./Wilcraft
2582 1/2 White Bear Avenue
Maplewood, MN
651-653-0534
|
Prices subject to change without notice.
Payable in US funds.
|
